TSS Digital Tubidity Sensor

The turbidity sensor uses a light scattering method based on a combination of infrared absorption and infrared light emitted by the light source after the scattering of turbidity in the sample. Finally, the photodetector converts the value of electrical signals, and obtains the turbidity of the sample after the analog and digital signal processing.

Download Specifications Sheet

SKU: S-TSS Category:
  • Description

    Product Description

    Specifications

    Measure range 0.01-1000 NTU, 0.01-4000 NTU
    Accuracy Less than the measured value of ±1%, or ±0.1 NTU, choose the big one one
    Pressure range ≤ 0.4 Mpa
    Current speed ≤ 2.5 m/s, 8.2 ft/s
    Calibration Sample calibration, slope calibration
    Sensor main material Body: SUS316L + PVC (normal type), SUS316L Titanium + PVC (sea water type); 0 type circle: Fluorine rubber; cable: PVC
    Power supply 12 V
    Communication interface MODBUS RS485
    Temperature storage -15 to 65ºC
    Working temperature 0 to 45ºC
    Size 60mm x 256mm
    Weight 1.65kg
    Protection grade IP68/NEMA6P
    Cable length Standard 10m cable, can extend to 100m

    Download Specifications Sheet